Apply Pump Protector

uh some what we call pump protector or antifreeze in it so we're going to get that i'm going to set that up and then that's going to be the fine we're going to load it up with our anti-freeze pump protector and we're going to be all done do our final uh rinse so i'm just using rv anti-freeze i'm going to put some of that in there now if you want to know you know what to run and store your sprayer in daily or over the winter or long term i got a video about all the different products you can use to put in your sprayer so go ahead and load up you want your prime tube to have um your um antifreeze in it my egg you want your guns to have both guns the hoses your prime tube so one thing luke we also got to do is run put your guards on you want to run water through both ends reverse the tip run it through both sides so your tips are clean i like to just make sure there's no paint on the seals typically you get a lot of paint built up on the guard we're gonna clean that off you might want to turn your pressure up luke a little bit once all your tips are done have you run um your antifreeze through the lines and prime tube go and run it through your prime tube so when you hit the prime should see pink coming out we got pink coming out now to finalize this whole thing it's critical um critical steps you want to turn the sprayer off release the pressure on the gun and release the prime two pressure and then we'll begin rolling our hoses up so if you don't release the pressure on the guns it's harder to roll up the hoses and it's also bad for the packings so we're going to turn it off turn sprayer off pull both gun triggers release we're going to release the prime tube pressure but i want to make sure i hold the prime tube pressure is released