Skip to main content
Stesso

Applying and Smoothing Caulk

5:34
11:59
576.6K views

At 5:34 in

CAULKING AND SPACKLING TIPS. DIY How to paint trim. Tips painting trim work.

Watch on YouTube

What happens here

Apply a bead of caulk along the joint where the trim meets the wall, or where different pieces of trim meet. For an entire door jamb, you can apply caulk to most of the length before smoothing. Immediately after applying a section of caulk, use a wet finger to smooth the caulk bead. The wetness of your finger prevents the caulk from sticking and allows for a clean, even finish. Regularly wipe off any excess caulk from your finger onto a wet sponge, keeping the sponge and your hands continually wet and clean. This technique creates a perfectly smooth, filled joint, making the trim look seamless. This method applies to all types of trim, including baseboards and crown molding.

Goal: This step demonstrates the application of caulk along the trim and wall joints, followed by smoothing it with a wet finger and a wet sponge to create a clean, seamless line.

Tools and materials

  • Caulking Gun
  • Wet Sponge
  • Acrylic Latex Caulking (White)
  • Water

What they say

Hide

sponge right here and so I'm just going to it typically would take a whole door jamb right here I'm going to caulk most of the door jamb and then begin wiping it off but you're just going to take take it and put a nice little bead of caulking on there and then I just take and wet my finger and then I'll begin wiping the excess out of a sponge and they'll start just smoothing it out I want to just use my finger wipe off the excess on my sponge just use the pad of my finger to get a nice smooth bead on there okay this is about the outside of the door jamb work on the inside of the door jamb once I get the inside done this is the outside right here where it meets the wall and this is going to be just the same as the baseboards if you got baseboards installed I'm just going to take get my the caulking gun its angle I want to lay that angle on there lay my feet out and then I'm just going to lightly push on it get a nice bead of caulking wipe the excess on my sponge and now I got a nice smooth bead of caulking it's really important to have a wet sponge or wet rag to keep your fit your hands what I call nice and lubricated trying to give you another look at this door down I'll just get the coffee in lay out my caulking on here with my coffee gun and then I'll begin working my corner right here smoothing it out and I like to just get that thing nice that corner up here nice and fill out I'm just going to keep working it right here smoothing it out too nice smooth finish right there so this

Auto-generated from the video audio.