Install and Wire Charger Module

What happens here

Place the wireless charging module into the routed recess on the underside of the wooden surface. Ensure it fits snugly and is flush with the bottom of the recess. Secure the module in place using a strong, non-conductive adhesive, such as construction adhesive or epoxy. If your module has screw holes, small non-metallic screws can also be used, but ensure they do not penetrate the top surface of the wood. Route the module's power cable neatly along the underside of the surface, using cable clips or ties to keep it tidy and secure. Connect the power cable to its designated power adapter, and then plug the adapter into a conveniently located electrical outlet.

Goal: Secure the charging module and provide power.