Assemble Table with Dowels and Glue

What happens here

On day two, after the stain is dry, the top tabletop is flipped over to expose the partial holes. Wood glue is generously applied to the ends of the painted dowels and inserted into the partial holes of the top tabletop. The presenter applies glue to the entire length of the dowel that will be inserted, citing that 'lubrication decreases friction' to ensure a smooth, secure fit. Blue painter's tape is used on the dowels to mark the desired insertion depth into the bottom tier (2.5 inches, matching the partial holes on the top). The bottom tabletop is then carefully aligned and lowered onto the exposed dowel ends, securing them in place. Clamps are used to hold the structure together while the glue dries, ensuring a strong bond.

Goal: The table is assembled by gluing the painted dowels into the pre-drilled holes in the tabletops. Wood glue is applied to the dowels, and they are inserted into the top tier's partial holes, then the bottom tier is carefully lowered onto the dowel ends and clamped.