Tile Shower Walls and Floor
13:35
17:04
7M views
At 13:35 in
Building a GIANT Shower (Home Remodel)
What happens here
Begin tiling the shower walls with 3x12 inch tiles in a vertical layout. Use appropriate tile spacers to ensure consistent grout lines. Then, lay penny round tiles on the shower floor, ensuring they conform to the existing slope of the shower pan. For the window sill, ensure the tile is installed with a slight slant into the shower to prevent water pooling. Once the tile is dry (typically after 24 hours), mix and apply grout to all tile joints. After the grout dries (another 24 hours), clean any haze from the tiles.
Goal: Install all wall and floor tiles, ensuring proper spacing, slope, and grout application.
Tools and materials
- 3x12 Inch Wall Tiles Marazzi — Covering shower walls
- Bucket Homer Bucket — Mixing grout and water for cleaning
- Grout — Filling gaps between tiles
- Mixer Drill Milwaukee — Mixing grout
- Penny Round Floor Tiles — Covering the shower floor
- Rubber Grout Float — Applying and spreading grout
- Sponge — Cleaning excess grout and haze
- Thin-set Mortar — Adhering tiles to cement board
- Tile Spacers — Ensuring consistent grout lines
- Trowel — Spreading thin-set mortar
What they say
(740 characters)Hide
What they say
(740 characters)Auto-generated from the video audio.