Install Shower Fixtures and Glass Panels
At 14:18 in
Building a GIANT Shower (Home Remodel)
What happens here
Cut the necessary opening for the water regulator on the tiled wall using an oscillating multi-tool. Install the pre-ordered shower head system, which includes a 16x16 inch overhead rain shower, a detachable handheld sprayer, and the water regulator. Ensure all components are securely attached and properly sealed. Install custom-cut shower glass panels. First, mount the provided brackets onto the glass panels using designated slots. Then, carefully bring the glass into position and set it onto clear rubber 1/8-inch spacers to prevent chipping. Mark and drill holes for the brackets using a tile drill bit, vacuum out debris, and secure the brackets with special tapered anchors and screws. Finally, trim off the 1/8-inch spacers and fill all bracket areas and seams with waterproof silicone for a secure and watertight finish.
Goal: Complete the shower by installing all functional and aesthetic fixtures, including shower heads and glass panels.
Tools and materials
- 1/4-inch Tile Drill Bit — Drilling holes in tile for brackets
- Clear Rubber 1/8-inch Spacers — Supporting glass panels and preventing chipping
- Cloth — Wiping excess silicone
- Glass Brackets — Mounting shower glass panels to walls
- Marker — Marking drill holes on tiles
- Oscillating Multi-Tool Dremel — Cutting tile for the water regulator opening
- Screwdriver — Tightening screws on brackets and fixtures
- Shower Head System — Providing water flow, including rain shower, handheld sprayer, and regulator
- Tapered Anchor Screws — Securing brackets into drilled holes
- Utility Knife / Blade — Trimming excess spacers
What they say
(2,372 characters)Hide
What they say
(2,372 characters)Auto-generated from the video audio.