Precise Decking Installation and Spacing

15:28

19:41

6.7K views

At 15:28 in

Building a Custom Deck with a Swinging Chair Arch!

Watch on YouTube

What happens here

This step covers the detailed process of installing the main composite decking boards with hidden fasteners, maintaining consistent spacing, and making precise adjustments. First, use a framing square to mark the position for the first board, ensuring it is perpendicular to the structure. Place the Decorators Stealthlock clips, which include a built-in spacer and a screw, into the grooves of the decking boards. Align the board and drive the screw through the clip into the deck joist using a DeWalt impact driver. The presenter emphasizes listening for the distinct bottom-out sound of the clutch to avoid overtightening. To maintain consistent 1/8-inch gaps between boards, use yellow T-spacers. For slightly warped boards, employ a decking board straightener to bring them into alignment before fastening. The video also shows a worker using a table saw to rip a composite board to size for a custom piece.

Goal: Install decking boards with precision, correct spacing, and secure hidden fasteners for a flawless deck surface.

Tools and materials

Composite Decking Boards — The main walking surface of the deck
Decking Board Straightener Camo Lever — Aligning warped boards for proper installation
Framing Square — Ensuring boards are installed perpendicular to the house/structure
Hidden Fasteners — Securing boards from the side and providing consistent spacing
Impact Driver/Drill DeWalt — Driving screws for the hidden fasteners
T-Spacer Yellow T-Spacer — Maintaining consistent 1/8-inch gaps between boards
Table Saw DeWalt — Ripping composite boards to custom widths

What they say

(1,458 characters)

Hide

the countertop so Jose you a man let's go [Music] cool thing we've got here brand new decorators Fastener decorators and Camo collaborated to come out with this stealth lock so uh thing that's a little bit different on this clip is it's designed for the Creator board so it's got this full nlon plastic whatever it is uh grommet here spacer clip so it fits into the groove really nice and snug and we can install it like we install all the other Fasteners but it's also got these little wings that go into it like yay and boom locked in for justice now stealth locked in for [Music] justice what do you got there uh 45 and A4 heavy 45 and A4 heavy all right I'm at 45 and 38 I'm cool with that yeah we definitely need to be pinched in here crank on this joh uh try it here you can see we're gapped like right there already to anywhere that really needs to be adjusted like good amount I like to throw a screw right in the center it'll get plugged so you won't even see it but it's really going to make sure that it's locked in for [Music] justice you always want to hear that sound when you're uh driving these so you don't over torque it and every drill is going to be different so you're never going to have the same setting mine right now is on a nine and it's perfect he's got his on a three so you got to play around with it make sure that it's sending it far enough but it's not over torquing it you want to hear it bottom out at the end torque [Music]

Auto-generated from the video audio.