Install Cable Railing

What happens here

This step details the final installation of the cable railing system. First, insert plastic plugs into the exterior holes of the posts to protect the cable and provide a clean finish. Then, carefully feed the stainless steel cables through all the pre-drilled holes in the posts. For one end of each cable, attach a specialized terminal fitting (e.g., a push-lock or swage fitting). The presenter demonstrates a push-lock fitting that simply slides onto the cable and locks, preventing it from pulling back. Once all cables are threaded and one end is securely attached, install tensioning mechanisms (turnbuckles or similar) to the other end of each cable. Use an appropriate wrench or tool to gradually tighten each cable until the desired tension is achieved, ensuring the railing meets safety standards and is taut. Finally, use heavy-duty cable cutters to trim any excess cable flush with the fittings for a clean, professional look. The goal is to achieve a continuous cable run without intermediate terminations, wrapping around corners for a seamless appearance.

Goal: Complete the cable railing system by threading, terminating, and tensioning the cables for safety and aesthetics.