Repin Transmission Harness Connector

8:36

45:15

38.1K views

At 8:36 in

Budget Turbo Yukon XL 4L80 Conversion (Part 4): THE WIRING CONVERSION LIFE HACK! The BEST Way!

Watch on YouTube

What happens here

According to the wiring diagram, remove pins S (white wire) and U (brown wire) from the transmission connector. The white wire will not be used, and the brown wire will be reinserted into position S. To remove a pin, gently push it from the wire side while using a small pick to lift the corresponding lock tab on the connector face. This allows the pin to slide out from the back.

Goal: Modify the pin configuration of the transmission harness

Tools and materials

Small Pick / Jeweler's Screwdriver — Releasing the lock tabs on the pins

What they say

(748 characters)

Hide

we are having fun today let's get this thing out of here now yep just poked it boom there you go you don't want to lose this and then inside there you can see the little gray pieces on top or next to the pins those are the locks that's what we have to pick free to slide these individual pieces out when we go to move them so looking at it like this we need to remove the white pin which is this one right here and we can kind of push on it to see you know which one it is i'm doing for the back side you can move it around in there and to get that out uh we're just gonna pick probably push forward a little bit poke a little lock thing and pull it out the back side which i don't have enough hands to film right now so it also once you remove pin

Auto-generated from the video audio.