Sand and Clean Brass Surfaces

2:56

7:30

262.2K views

At 2:56 in

Brass Painting Hacks. Instructions Painting A Brass Fireplace Black.

Watch on YouTube

What happens here

Now, prep the removed brass pieces. Use fine sanding sponges or sandpaper to lightly scuff the brass surfaces. This creates a rough profile crucial for paint to bond effectively and prevent peeling from the smooth brass finish. After sanding, clean each piece thoroughly with Dawn dish soap and a sponge (or scouring pad) to remove any contaminants that could lead to imperfections like "fish eye" in the paint. The pieces are then left to dry completely before proceeding.

Goal: Create a suitable surface profile on the brass for paint adhesion and remove all contaminants.

Tools and materials

Sanding sponges not specified — Roughing the brass surface to improve paint adhesion
Scouring pad not specified — Assisting with cleaning tough spots on the brass
Sponge not specified — Cleaning the brass with soap
Dawn dish soap Dawn — Cleaning contaminants and oils off the brass

What they say

(1,289 characters)

Hide

our cleaner and then sanding them. So now we're going to begin the prepping process of this brass. Now I got this brass right here. Got some fine sanding sponges, some sandpaper, paper, and rubber paper just to begin sanding this. Whatever works best to get around the angles. And we just begin lightly sanding it. Get it nice and scuffed up. Then we're going to clean them with Dawn, our dish soap, to make sure there's no contaminants. It doesn't take It just takes a little bit of light sanding just so you can see that it's scratched and scuffed up. If you don't sand it, then you're not going to create a rough enough profile for your paint to bond to, and it probably could actually peel off pretty easily since it is a really smooth brass finish. [Music] So, just like that. So, this one, this piece is sanded. It's got a nice good uh scratched up profile on it. Now, I'll begin cleaning it with my dish soap. So, when you get ready to clean them, we just actually use Dawn dish soap. It actually rinses off, doesn't leave a residue, and we use it to actually get any contaminants off so you don't get any fish eye in where it's actually beading away. Dawn dish soap, just a simple inexpensive soap. And we typically use a sponge and a showering pad. So once we get these things all

Auto-generated from the video audio.