Skip to main content
Stesso

Final Wheel Reinstallation

2:12
2:26
315.5K views

At 2:12 in

Brake replacement

Watch on YouTube

What happens here

Carefully lift the wheel back onto the hub, aligning the lug holes. Start all the lug nuts by hand to avoid cross-threading. Once all lug nuts are hand-tight, lower the vehicle until the wheel is just touching the ground but not bearing full weight. Using a torque wrench, tighten the lug nuts in a star pattern to the manufacturer's specified torque settings. Lower the vehicle completely and remove the jack stand and floor jack.

Goal: Reinstall the wheel and secure it properly.

Tools and materials

  • Floor Jack Daytona — Lowering the vehicle
  • Jack Stand Daytona — Removed after lowering vehicle
  • Lug Nuts — Securing the wheel to the hub
  • Torque Wrench — Tightening lug nuts to specifications
  • Wheel — Reinstalled onto the vehicle

What they say

Hide

Close it. Pump. Crack the bleeder. Make sure that it's solid. And don't let your reservoir run dry. Put your wheel on. Start your lug nuts by hand. Pull your stands. Lower the vehicle. Torque to spec in a star pattern. Anyways, I got the fronts to do. I'll catch you guys later. Peace.

Auto-generated from the video audio.