Skip to main content
Stesso

Witness a Dyno Test of a 632 Crate Engine

2:05
28:10
70.9K views

At 2:05 in

BluePrint Engines Factory Full Tour & Behind The Scenes: Engineering Dept and R&D Zone! (Its Wild)

Watch on YouTube

What happens here

Witness a 632 cubic inch engine undergo a dyno pull, generating 839 horsepower. The dyno operator monitors various parameters on a computer screen, including horsepower, torque, RPM, and temperatures, ensuring the engine performs within specifications. This test motor, despite having over 800 pulls, still meets its advertised horsepower.

Goal: Observe a high-performance engine dyno test and its power output.

Tools and materials

  • 632 Crate Engine Blueprint Engines — The engine being tested
  • Computer Monitors Acer — Displaying real-time engine data and performance graphs
  • SuperFlow Dyno Console SuperFlow — Monitoring and controlling the dyno test parameters

What they say

Hide

lot of air [Music] what i do 839 839 i thought this thing was an ls motor when i walked by it ah so this is a this is a new product that we're working on it's going to be a coil near plug small block ford engine uh we're throwing the holley high rise intake manifold on it we've got a drive by wire throttle body on it just same thing you'd see in an lt corvette we're putting our own fuel system on it uh where we've got our own ecms our own harnesses this is in cylinder pressure test equipment so each each one of these combustion chambers on the end on the ends of the heads we have one typically when we do the development work we'll have a pressure sensor in every combustion chamber the reason we don't on a ford is because the cylinder head actually only has one spot in it where you can put a pressure transducer and that's on the end of the head is it allows us to really refine the tune on this engine so when we're

Auto-generated from the video audio.