Skip to main content
Stesso

Apply Paint with Airless Sprayer

7:25
12:59
267.9K views

At 7:25 in

BEST Way To Paint Doors. AIRLESS SPRAYING.

Watch on YouTube

What happens here

Before beginning to spray, the presenter dons essential safety gear: a respirator and eye protection. He also highlights the importance of carrying an 'injection card' in your wallet when airless spraying, as accidental paint injection into the skin is a serious injury requiring immediate medical attention and specific treatment information for hospital staff. The spraying technique involves always starting and stopping the spray gun *off* the surface of the door. This prevents 'spits' or uneven paint application that can occur when starting or stopping directly on the surface, especially with smooth finishes. The presenter uses a gun extension to increase his reach and ensure even coverage. Two coats of PPG Breakthrough paint are applied to the front doors, which are described as a mixture of vinyl and metal. The back doors, which are vinyl with a fine grain, are also sprayed, with the paint's high solids content ensuring good coverage without filling in the grain. The paint dries quickly, allowing for a second coat within an hour.

Goal: With proper safety gear, the doors are spray painted using a specific technique to avoid imperfections.

Tools and materials

  • Airless Sprayer (Titan 410 Impact) Titan
  • Eye Protection
  • Respirator
  • Spray Gun Extension

What they say

Hide

actually lose a limb or die so make sure you have an injection card with you that you give to the hospital staff if you ever get injected it's a serious injury so get ready to go no quick pointers while spraying you see I was never starting and stopping on my door because if you start on your door especially a smooth door like this you're gonna get what we call is spits anytime you have a gun extension which extends is extends my reach makes it easier for me to spray which I always use you're gonna get some spits with it so just make sure you start off your surface start and stop off the surface so everywhere I was going I was starting soft being off my surface so I get no spits on this glassy smooth finish right here looks really good I don't see any light spots it's already starting to dry so it's looking pretty good I'll look over it and decide whether y'all want to put another coat on it or not all right so we got the two front doors sprayed they're all dry I've spent you know several hours we've got the back French doors with glass there sprayed first coat and they're sitting there dry and these were sprayed with two coats now we're gonna pull down this plastic plastic and do the hanging process get these doors up and out of the way just got to be careful with them because they're dry but they're not cure so you just got a handle of my I carried them up here by I mean where the hinges were inside here I grabbed onto this metal right there where um I wasn't actually grabbing the paint where I could actually scratch it or put fingerprints on the paint all right we got the doors all hung now the last process I'd like to do is just take

Auto-generated from the video audio.