Test for Leaks

0:54

1:01

200.5K views

At 0:54 in

Bathroom sink drain was leaking! The reason may surprise you! #diy #plumbing #helpingothers

Watch on YouTube

What happens here

Once the P-trap is fully reassembled and all connections are tightened, turn on the water in the sink. Allow water to run through the drain for a minute or two while carefully inspecting all connections of the P-trap and the newly installed fitting for any signs of leaks. The video confirms that after the repair, there are no leaks.

Goal: Verify the repair is successful and leak-free

Tools and materials

Running Water N/A — Testing the integrity of the P-trap seal

What they say

(157 characters)

Hide

Some glue, quarter turn. Get this all cleaned up. There's no sense in throwing it away. It's just a little dirty. On some water through it, there's no leaks.

Auto-generated from the video audio.

That Fix It GuyAir Force–trained plumber

Brian learned plumbing in the U.S. Air Force and has plumbed his way around the world. Now he films the fixes homeowners actually face: slow toilets, dripping faucets, clogged drains, failing water heaters and disposals. He shows what broke, why it broke, and how to fix it for a fraction of the cost of replacing it. He's particular about the right part, too: no snappy traps, no chemical drain cleaners. His rule: if he can do it, you can do it.

893 videos indexed

Ask Brian About Brian

Also in this video

0:000:16

Identify the Leak and Cause

0:020:05

Disassemble the P-Trap

0:200:17

Cut the Problematic Pipe Section

0:380:06

Clean and Install New ABS Trap Adapter

0:450:08

Clean and Reassemble the P-Trap

0:540:04

Test for Leaks

Playing