Load and Use the Tipsaver for Cleaning and Storage

through our testing we must have taken the tip saver in and out of the can a million times because we wanted to make sure it was fully functional in every aspect so you have your couple inches of solvent in there that needs to drain off before you take the tip saver out because we don't want it leaking all over the place so those are I guess what you would call maybe like drain holes gutters or it dissipates the liquid quickly so that you can get the tip saver out of the can without slopping all over your job set yep so basically their drain slots it helps the liquid drain out here's another thing and we've got the slot where a guard goes in so the guard slides in right here and it's gonna cut these notches and Matt you know is what the heck are the notches for well tell me you know the notches are actually where the the duckbill wings if you caught whatever you call them sit down in there so that the housing sits in there securely and doesn't get in the way of you retrieving your tips or filters we figured out the best placement so that the housing is set down in there securely and not in your way there you go there's a rhyme and a reason for every simple little thing on this device right here so I know one of the questions people are gonna ask and I think you've been presented with this question before you stick this housing and we'll stick this one or SiC that one down in the can right there we'll have you do that it's gonna stick down to the can and I this how I use the tip saver and I don't know whether this is right or wrong but I take and I put about you know two to three inches of paint thinner and sometimes I'll use painting or lacquer I kind of interchange and well fill about this high and paint thinner and these are sitting down there I typically don't have you know tons of tips in my can but if you have this thing fully loaded your tips are down here I use it so they don't dry out so they don't crowed and there when I go to use them again the paint's gonna flow right through them well these tips up here if you have the apprentice and he doesn't clean this he pulls out a gun he sticks it down in this can it's not in the paint dinner I mean he's gonna come back and it's gonna be dried out right it won't that atmosphere in that can is enough to keep everything real pliable keep those orifices nice and clean you can just back blow your paint out of there and you're on your way the next time so you can it's up to you do you want to use two inches of…