Install Tips and Filters into Tipsaver

molded so that it it can only go this way you try to put together the other way it's not gonna go you're gonna have a problem with that so there's a center column so assembly for dummies yes exactly there is a platform in the center column that allows you to drop your housings down into the column once the tip saver is assembled that platform has to go towards the bottom of the tip saver so there is there's an upside down in a right side up basically which if you get that wrong you'll know right away because your filters aren't going to go into the column yep and it's as simple as taking the column back out and reinsert it the correct way next step is to install the top plate and you're now ready to put tips and housings and everything in last thing you want to do is put your handle on so that you're not gonna have to submerge your hand in the solvent to get them down in there it's as simple as that and the tip saver is ready to go to work there you go assembly fast and easy so when I think you guys sent me these you know a couple of them a long time ago and I got them and the first thing I said is that ain't gonna work cuz I'm gonna stick it down into some reduce or 54 or some let it set in there and I'm gonna come back the next day and it's all good to be melted the plastic is gonna be sitting in the bottom of the container I was like this isn't gonna work it needs to be metal so what's unique about this plastic that's is it gonna melt and be at the bottom of the cam it is not we actually they thought about that problem right and