Skip to main content
Stesso

Remove Screws and Spray Button

0:09
1:00
33.3K views

At 0:09 in

Almost Like New Vacuum Cleaner Hose Fix! #diy #helpingothers

Watch on YouTube

What happens here

After prying the handle casing apart, locate and remove the two screws that hold the internal components in place. Next, gently lift off the gray spray button cover. Underneath, a small white clamp holding the internal water line (a clear, thin tube) will be visible. Use needle-nose pliers to squeeze and slide this clamp away from the connection point, allowing the water line to be pulled free.

Goal: Once the handle casing is partially open, unscrew the screws securing the handle components. Carefully lift off the spray button cover and detach the internal water line's clamp.

Tools and materials

  • Needle-nose pliers
  • Screwdriver

What they say

Hide

This is our Bissell Spot Clean Pro. This hose is starting to split. So, you just got to work both sides of this where both of these tabs are. Don't want to clip that. So, let's pop this part of the handle off. A little clamp that's actually holding this hose on, and then you can just slide that out of the way. It's going to cut around it. Give it chop. Grab the wire piece and just start pulling.

Auto-generated from the video audio.