Skip to main content
Stesso

Cut Damaged Hose Section

0:20
1:00
33.3K views

At 0:20 in

Almost Like New Vacuum Cleaner Hose Fix! #diy #helpingothers

Watch on YouTube

What happens here

Once the internal water line is disconnected and its clamp is moved aside, the main vacuum hose can be accessed. Using a pair of sharp wire cutters or strong snips, cut off the entire damaged, split section of the hose. Make a clean, straight cut through the hose, ensuring no frayed edges remain that could compromise the new seal.

Goal: With the internal water line and clamp removed, use a sharp cutting tool to sever the damaged, split section of the main vacuum hose. This isolates the good portion of the hose for reattachment.

Tools and materials

  • Wire cutters

What they say

Hide

this part of the handle off. A little clamp that's actually holding this hose on, and then you can just slide that out of the way. It's going to cut around it. Give it chop. Grab the wire piece and just start pulling. A little bit of ABS glue. This is lefty loosey to tighten. Put that hose back through that hole. Dimple right there, we're going to put it into that divot, and it's going to actually

Auto-generated from the video audio.