Removing Overspray from Porous Brick

oh this person got overspray on porous brick due to a lack of better masking any suggestions on removing it if I can remember what we did I would tell you so Laurel had it yes that was vinegar floor that's right like spray cans it was been an oil-based and it actually worked yeah vinegar it was a white vinegar we use now if you're talking like a latex based thing and you got overspray all over it you're probably looking at you know using ammonia or goof-off or something like that to try to remove the coating from the brick and a wire brush you're trying to get in there but it depends how porous brick is and yeah be careful to like wire brush you know it's because sometimes some of the chemicals the wire brush will start to stain the brick and graze so if that was the case you can use a nylon brush you know and just what you start ended up running into unfortunately as you start to clean the brick really good so then it's not clean and you start to see a difference where you scrubbed and cleaned versus not cleaned and you know just don't get overspray on the track and then it won't have that problem try to remedy do you're gonna try to fix it right away if