Skip to main content
Stesso

Hose Whip Safety and Pressure Ratings

7:53
11:40
27.7K views

At 7:53 in

Airless Spraying Tips and Tricks | YOUR QUESTIONS ANSWERED!

Watch on YouTube

What happens here

Hose whips, like the ones used with a Titan 1140, have specific pressure ratings. While some custom-made hose whips can handle pressures up to 5075 PSI, and many pumps are rated around 3000-3200 PSI, it's crucial to ensure that the hose whip's pressure rating is *never* less than the maximum output pressure of your pump. Using a hose whip rated for lower pressure than your pump can create a dangerous situation and should be avoided. Always check the specifications of both your pump and your hose whip to ensure compatibility and safe operation.

Goal: This step addresses safety concerns regarding hose whips, emphasizing the importance of matching their pressure rating to the pump's output.

Tools and materials

  • Hose Whip
  • Paint Sprayer (e.g
  • Titan 1140)
  • Spray Gun

What they say

Hide

manufacturers and stuff so this person's a bit concerned about the safety of hose whips since they can't handle as much pressure you can't handle the pressure so every hose with I've ever seen it has pressure that's higher than the actual pump itself so I'm not sure sar into 3200 PSI some are rated it or thousands some are rated at 5700 and up from there so yeah see don't be a and make sure you run under that guideline si I think the the hose whips that we our custom-made hose whips that we send out the line rain was there rated it five thousand seventy five psi and your pumps are typically mated I believe three thousand and thirty one thirty two hundred psi most consumer or contractor grade electric spray rigs are three thousand psi our eyes yeah save me thirty two hundred but if you do have a hose whip that this rated less than your pump that obviously can be an issue and

Auto-generated from the video audio.