Skip to main content

Circular Saw Performance Comparison

2:32
12:20
362K views

At 2:32 in

8 New Dewalt tools

What happens here

A side-by-side comparison is performed using an older model DeWalt circular saw and a new 60V FlexVolt circular saw. Both saws are used to cut through three pieces of 3/4-inch plywood. The old saw takes approximately 13 seconds to complete the cut, while the new 60V FlexVolt saw finishes in just under 8 seconds. This visually demonstrates the significant power and speed improvement of the new FlexVolt tool due to enhanced motor design and software upgrades.

Goal: Demonstrate the improved speed and power of the new 60V FlexVolt circular saw.

Tools and materials

  • Older Model DeWalt Circular Saw DeWalt — Baseline for performance comparison
  • 3/4-inch Plywood — Material for cutting demonstration

What they say

Hide

internal upgrades - yeah if we want to do this circular saw side-by-side you actually will see that you can go through much faster with the new one versus all right so what we're gonna do is nate is going to run one what battery technology were using now using the flexible battery technology on our sixty volts are brand new saw brand new pet and then we're news last year [Music] and that's cutting through three pieces of 3/4 plywood all in one one shot nice clean even cuts now the upgrade unit your buddy just tell a little more power there now you were trying to make it look good for the camp not at all that's easy that's correct so these are gonna be launching you'll start to see them in stores in April 22 April 21 yep all right guys let's look at these one more time but let's do them side by each that way we can see the difference in cut the new saw came in at just a little bit under 8 seconds while the old saw took almost 13 seconds to do the same thing

Auto-generated from the video audio.