Mask Vertical Support Beams

so this is where the customer wants this to be match the rest of the walls and stuff so i'm just masking this off so this bar can get painted and i'm just going to all switch tips i'll switch out to a 208 to spray this bar that way it'll go fast and easy you can if you don't if you're concerned about overspray getting too much overspray around that bar you know we can get somebody to just run a four inch you know roller on this part of it thing i'm concerned about is all the holes in this if you run a roller on that you might get a lot of drips and stuff so it's just take a cardboard shield and just spray it with a cardboard shield so we did have a wood support beam right here customer did not want that painted just quickly wrapped a piece of nine inch paper around that and then drop plastic over that to cover this any overspray dust fallout just to protect that so it doesn't get you know anything on it