Skip to main content
Stesso

Waterless Paint Bucket Cleaning

4:03
7:49
38.2K views

At 4:03 in

4+ Interior Painting HACKS!

Watch on YouTube

What happens here

After completing your painting task, adopt an efficient and water-saving method for cleaning your paint buckets. First, carefully pour any excess paint from smaller 'cut-in' buckets back into the main paint can to conserve paint and minimize waste. Next, using a scraping tool (such as a paint brush handle, putty knife, or painter's 5-in-1 tool), diligently scrape all remaining paint from the bottom and sides of the bucket. The objective is to remove as much liquid paint as possible, leaving only a very thin, almost translucent film on the interior surfaces of the bucket. Once the excess paint is scraped away, place the bucket in a sunny and dry outdoor location. The thin layer of paint will dry relatively quickly, especially for latex or exterior paints, typically within a few hours. Once completely dry, the hardened paint film can be effortlessly peeled away from the bucket's surface, leaving it clean and ready for future use without the need for water, chemical solvents, or the creation of messy, paint-laden runoff. This method is primarily suitable for water-based (latex) paints.

Goal: This step presents an efficient and environmentally friendly method for cleaning paint buckets without using water, by scraping out residual paint and allowing the remaining thin film to dry and peel off.

Tools and materials

  • Main Paint Can
  • Paint Buckets

What they say

Hide

another little hack for you I'm done painting for the day and I'm just gonna take an empty out light bucket this is my cutting bucket I'm gonna pour it back in to my pin because I want to save my paint I don't want to waste any paint and then the other thing I'm gonna do is just scrape out my bucket there's still a lot of paint in here I'm gonna wipe this edge so make a big mess and I'm gonna scrape out the excess in here into my single put it right in there there's a lot of paint in there but the one thing I want to show you and this is the simple little hack I don't want to have to go clean out this bucket because then you know I could just you know use water that I don't need to use if wire's water is scarce where you're at you're in a drought and I don't have to make a big ole mess cleaning this bucket so I'm just gonna scrape all the excess paint out here carefully and there's just a little bit left inside the bucket now what I do is you can see there's a little bit of white paint left in the bucket I take what's left in there and I'm just gonna wipe this up the sides of my bucket so there's nothing down in the bottom so this will dry out and I won't have to wash it it's gonna leave like this thin film of paint inside here and it'll dry because this paint is an exterior to paint this bucket will literally dry in a few hours if I don't leave a whole lot left on the bottom I scrape all the stuff from the bottom scrape it up the sides and then I can use that bucket and typically what I do is I'll do that four to five times then I'll let this bucket set out in the Sun and the bucket will easily peel out it's a simple way cleaning your buckets but not using water and not creating a big mess so I

Auto-generated from the video audio.