Mount the LED Light Fixture
0:05
0:12
376 views
At 0:05 in
$20 harbor freight hutch upgrade! Subscribe for more! 👊
What happens here
Using the mounting clips and screws provided with the Braun LED light fixture, securely attach the light to the underside of the workbench shelf or cabinet. Typically, you will mark the positions for the clips, use a pencil for accuracy, and then pre-drill pilot holes using a power drill to prevent wood splitting. Once pilot holes are made, fasten the clips with a screwdriver or power drill. Finally, snap the LED fixture into the mounted clips. If your fixture is linkable, consider future expansion when positioning.
Goal: Securely attach the light fixture to the desired location.
Tools and materials
- Braun LED Linkable Light Braun — The light fixture being mounted
- Mounting Clips N/A — Hardware to hold the light fixture in place (usually included with the light)
- Pencil N/A — For marking pilot hole locations
- Power Drill N/A — To pre-drill pilot holes and drive screws
- Screwdriver N/A — For manual fastening of screws if a drill is not used or preferred
- Screws N/A — To fasten the mounting clips (usually included with the light)