Skip to main content

Prepare the Sprayer and Paint

0:37
12:41
220.5K views

At 0:37 in

10+ TIPS Painting Doors

What happens here

Begin by setting up the airless sprayer. The narrator uses a Titan Impact 410. Pour the paint from its original container into a 5-gallon bucket; this provides a stable base and prevents accidental tipping, which can happen if a single gallon container is placed directly on the ground. Once the paint is in the 5-gallon bucket, place the sprayer's intake tube directly into the paint. Use a secondary bucket for priming the sprayer. If using more than one gallon of paint, 'box' them together by pouring them into a larger container (like the 5-gallon bucket) and mixing them thoroughly to ensure consistent color across all gallons. For spraying the main door panels, attach a Titan high-production 515 spray tip to the sprayer. Finally, attach a 30-inch gun extension to the sprayer gun; this provides better reach and reduces strain, especially for taller surfaces or when working as a shorter individual.

Goal: This step involves setting up the airless sprayer, preparing the paint by transferring it to a stable bucket and ensuring color consistency through 'boxing', and selecting the appropriate spray tip and gun extension for the main door panels.

Tools and materials

  • 30-inch Gun Extension
  • Paint (Garage Door Color)

What they say

Hide

ready to do the spraying right here I like to put my paint inside of a five-gallon bucket that way it's less likely to tip over so I'm gonna be loading up the sprayer here I'm just gonna take lid off my paint set it inside my five and we'll get this thing loaded up but now if you just have it in a single gallon sitting on the grass I've done that many times in the past and it's actually tipped over so and then I like to have a secondary bucket I'm gonna stick my intake tube right into my paint get a secondary bucket to prime with now I've got multiple doors I'm spraying here so it's gonna take more two gallon of paint so I'm gonna top off my paint with my second gallon and that's acting as boxing the paint to make sure you have color consistency someone be stick it on chosen a tighten high-production 5-15 tip to spray these doors with and that's when we spray exteriors typically the whole exterior is sprayed with a 515 tip and that the the trim around the door it's really narrow and I don't need a 10 inch white van so I'll switch over once I start to do the trim - I think I'm gonna use a two away so I've got on my gun extension and being as short as I am I don't have to you'll reach as much as high or down low with the extension I always spray with us an extension 100% of the time that I spray so I've got this ready to go and we'll get ready to spray it here

Auto-generated from the video audio.