Skip to main content
Stesso
Project

Attach Drain Hose to Dishwasher — Connect Dishwasher Drain Hose

Beginner

Part of project

How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal · Step 7 of 8

Helpful?

In this video

Identify the 'drain end' of the new hose, which is typically the curved end. Slide a spring-style hose clamp over this end. Firmly push the hose onto the dishwasher's drain port. Using pliers, squeeze the tabs of the hose clamp to open it, then slide it over the connection point. Ensure the clamp is positioned securely between the raised ridges on the hose fitting to prevent leaks.

Goal: Connect Drain Hose to Appliance

  • The hose is often marked 'drain end' and 'sink end'. The curved end usually attaches to the dishwasher.
  • A screw-type clamp can be easier to manage than the spring-type clamp shown.
  • Having a helper to stabilize the dishwasher can make pushing the hose on much easier.

Used in this video

  • Pliers — Squeezing the spring clamp to open it and slide it into place.
16.1K views10010 minutes
Jacks Plumbing Videos

2K subscribers

View Channel

FAQs

How difficult is it to plumb a double kitchen sink with a garbage disposal for a beginner, and how long should I expect it to take?

This project is rated as beginner-friendly, but requires patience and attention to detail. For a DIY novice, plan to set aside 3-5 hours, especially if you encounter unexpected issues or need to make precise cuts. The material cost, including the disposal and plumbing parts, typically ranges from $150-$400 depending on the quality and features chosen.

Are all the listed tools, especially specialized cutters and reamers, truly essential for this plumbing project?

While basic tools like Channellock pliers and a screwdriver are essential, specialized tools like the RIDGID PTEC 3000 plastic tubing cutter and the Husky Reamer are highly recommended. They ensure clean, burr-free cuts on plastic pipes, which significantly reduces the risk of leaks and makes assembly much easier. You could use a hacksaw for cuts, but meticulous deburring would then be critical.

What are the most common mistakes that lead to leaks after installing a double sink drain and garbage disposal, and how can I prevent them?

The most common causes of leaks are improperly tightened slip-nut connections, not using plumber's putty correctly around the sink flange, and misaligned P-trap components. Always hand-tighten slip nuts first, then use your Channellock pliers for an additional half-turn, ensuring all washers are seated perfectly. Thoroughly test for leaks by running water and inspecting every connection with paper towels.

What specific safety precautions should I take when working under the sink, especially with a garbage disposal and water lines?

Safety is paramount. Always disconnect power to the garbage disposal at the circuit breaker before beginning any work on it. Turn off the water supply to the sink at the shut-off valves or main house valve. Wear safety glasses to protect your eyes from debris, and use gloves to avoid contact with old grime or chemicals.

Transcript
Hide

So once you've done that, you need a drain hose. Typically, and always have two ends, one end says sink end. The other end says drain end. So if you have any questions and it's plain and simple. If yours doesn't say that, the curved end is usually for the dishwasher. The straight end is usually for the sink. So we are going to put the drain end for the dishwasher under here so that there's still room and then there's one more thing we need to do and that is installing a hose clamp. Now if you have these, I don't really like them because they hardly ever work. It's really tough to get them open and then sliding them on can be difficult. So if you want to use them, use them. Otherwise use the one with the screw in it. So you're going to put this clamp right between these two lines. We're going to put it on this end first. It's going to be a little bit difficult. It's easier to put it on this side ahead of time than to try to squeeze the clamp and get it over it once you have this on there. So we're going to push this on like so. Now if you have another person having them at that end of the dishwasher so that you can push harder makes this part a lot easier. Otherwise just use a tool here like this, open that up as far as you can and then try to push this all the way on without the dishwasher sliding too much. So we're just going to keep wiggling that all the way on, get it on as far as you can. Okay, once you have the dishwasher and connected, the next step will be connecting it to your

Auto-generated transcript. May contain errors.