stesso

Project

From inside the shower, remove the visible parts of the old faucet. Start by prying off the decorative caps on the handles with a small flathead screwdriver or utility knife. This will expose a set screw, which can be removed with an Allen wrench or Phillips screwdriver. Pull the handles straight off. Next, unscrew the escutcheons (the chrome flange plates behind the handles). They may be threaded on or held by screws. If they are stuck, you may need to carefully cut the old caulk seal with a utility knife. Finally, unscrew the tub spout. If it doesn't unscrew, it may have a set screw on the underside that needs to be loosened.

You're viewing a step from: How to Replace a Two-Handle Shower Faucet

Intermediate

30 minutes

2/4 Inventory

This guide provides comprehensive, step-by-step instructions for removing an old two-handle shower faucet and installing a new one. The process covers shutting off the water, accessing the valve within the wall, disconnecting the old valve, soldering the new valve into place, testing for leaks, and installing the new trim.

Based on content fromSimpleDIY· 5K subscribers

Frequently Asked Questions

Is this project truly 'intermediate,' and what specific skills do I need to successfully replace my two-handle shower faucet?

Yes, this project is rated intermediate primarily because it involves soldering copper pipes, which requires practice and a steady hand. You'll also need basic carpentry skills for opening and repairing the access hole, and a good understanding of how to properly shut off and drain your home's water supply. If you're new to soldering, practice on scrap copper pipe first to gain confidence before working on the live plumbing.

What are the most critical safety precautions I should take when working with a propane torch and soldering pipes inside a wall?

Always ensure proper ventilation to dissipate fumes, and keep a fire extinguisher or bucket of water nearby in case of accidental ignition. Clear the work area of all flammable materials like insulation, wood studs, and plastics before beginning to solder. Wear appropriate safety glasses and heat-resistant gloves, and never point the torch flame at anything other than the pipe connection you are working on.

How can I prevent leaks after installing the new valve, and what should I do if I discover one during the initial test?

To prevent leaks, ensure all pipe ends and fittings are clean, properly fluxed, and heated evenly for the solder to flow completely around each joint. After soldering, perform a thorough leak test by slowly turning the water back on and checking every new connection with a dry paper towel for at least 15-30 minutes. If you find a leak, turn off the water immediately, drain the line, and re-solder the faulty joint after inspecting it for imperfections.

Do I really need specific tools like a propane torch and plumbing solder, or are there alternative connection methods for a DIYer?

This project, as detailed, requires soldering for a professional and durable connection, which necessitates a propane torch, lead-free solder wire, and flux paste. While alternatives like push-to-connect (e.g., SharkBite) or press-fit fittings exist and don't require a torch, they often cost more per fitting and require different specialized tools. Soldering is a reliable and common method for copper plumbing, offering a secure, long-lasting seal.