stesso

Project

Start with the main P-trap cover. These are often hinged or two-piece designs. Open the cover and carefully position it around the entire P-trap assembly, ensuring it covers the U-bend, tailpiece connection, and trap arm connection. Align the seams and close the cover. Secure it using the fastening mechanism provided with the kit. This could be interlocking tabs that snap together, hook-and-loop (Velcro) straps that wrap around the cover, or plastic snap rivets that push through corresponding holes. Ensure the fit is snug and the cover does not slide.

You're viewing a step from: How to Install an ADA-Compliant Under-Sink Plumbing Shield

Beginner

30 minutes

2/4 Inventory

This guide provides comprehensive, step-by-step instructions for installing an ADA-compliant under-sink plumbing shield. The process involves preparing the work area, measuring and trimming the shield components, and securely fitting them over the P-trap, water supply lines, and shut-off valves to protect individuals in wheelchairs from burns and abrasions.

Based on content fromThis Old House· 2.2M subscribers

Frequently Asked Questions

How difficult is it to install an ADA-compliant under-sink plumbing shield, and how long should I expect the project to take?

This project is rated as 'beginner' difficulty, making it accessible for most DIYers. Typically, the installation can be completed within 1 to 2 hours, depending on your prior experience and the specific configuration of your under-sink plumbing. The main skills involved are accurate measuring and careful cutting.

What are the key safety precautions I should take when installing this under-sink plumbing shield?

Always ensure the area under the sink is well-lit and clear of obstructions to prevent accidental bumps or falls. While not directly altering plumbing, it's a good practice to turn off the water supply to the sink if you'll be working very closely to the pipes. Wear gloves to protect your hands from any sharp edges on existing plumbing or newly cut shield components.

Do I really need a specialized plastic sheet cutting tool, or can I use a standard utility knife for trimming the shield components?

While a standard utility knife can work, a specialized plastic sheet cutting tool (like the 'Utility Knife Plastic Sheet Cutting Tool GE-41' listed) is highly recommended. It provides cleaner, more precise cuts on the thick plastic material of the shield, ensuring a better fit and reducing the risk of material cracking or an uneven edge.

What's the most common mistake people make during installation, and how can I ensure a perfect fit for my plumbing?

The most common mistake is inaccurate measurement, leading to gaps or an ill-fitting shield. To avoid this, meticulously measure all plumbing components, especially the P-trap, supply lines, and shut-off valves, using a reliable tape measure. Remember the DIY adage: 'Measure twice, cut once,' and always cut slightly smaller initially if unsure, as you can always trim more.