stesso

Project

With the locknut loosened, you can now adjust the pressure. To decrease the water pressure (our goal), use a wrench or screwdriver to turn the adjustment bolt counter-clockwise ('lefty-loosey'). To increase pressure, you would turn it clockwise ('righty-tighty'). Make only a small adjustment at first—a quarter-turn or half-turn is sufficient. It is crucial not to make large adjustments at once, as this can cause a dramatic and unpredictable change in pressure.

You're viewing a step from: How to Adjust a Water Pressure Reducing Valve (PRV)

Beginner

30 minutes

2/4 Inventory

This guide provides comprehensive, step-by-step instructions for testing and adjusting a residential water pressure reducing valve (PRV). The process involves measuring the existing water pressure, locating the PRV, making incremental adjustments to its settings, and re-testing until the desired pressure level is achieved.

Based on content fromKnow How Now· 92K subscribers

Frequently Asked Questions

How long does this project typically take, and is it really suitable for a DIY beginner?

Adjusting a PRV usually takes 30-60 minutes once you have the right tools and understand the steps. It is considered beginner-friendly as it primarily involves turning a bolt and monitoring a gauge. The main challenge is patience with incremental adjustments rather than complex plumbing skills.

Do I need a specific type of pressure gauge, or will any pressure gauge work for this project?

Yes, a specialized water pressure gauge that attaches to an outdoor spigot or washing machine hookup is essential for accurate readings. The Orbit Pressure Gauge 91130 or Water Source WSPGH100 are ideal for this. Using a generic or inaccurate gauge can lead to incorrect pressure settings, potentially damaging your plumbing.

What if I adjust the PRV but don't see any change in my water pressure?

If there's no change, first ensure your gauge is properly attached and functioning, and that you've loosened the locknut before turning the adjustment screw. The PRV itself might be faulty, clogged, or too old to respond to adjustments. In such cases, the PRV may need to be repaired or replaced by a professional plumber.

Are there any safety precautions I should take, or things I should absolutely avoid when adjusting the PRV?

Always make small, incremental adjustments (quarter turns at a time) to avoid sudden, drastic pressure changes that could stress your plumbing system. Never overtighten or force the adjustment screw, as this can damage the valve. Ensure the locknut is securely tightened after making adjustments to prevent the setting from drifting.