stesso

Project

With the nailing flange exposed, you can now detach the tub from the wall studs. Look for the screws or roofing nails that were driven through the flange into the studs. Use a drill/driver or a pry bar's claw to remove them. Often, these fasteners are corroded or embedded in tile adhesive. The most effective method is often to use a reciprocating saw with a metal-cutting or demolition blade. Slide the blade between the flange and the stud and cut through each fastener. Do this for all studs along the three sides of the tub.

You're viewing a step from: How to Remove an Old Bathtub for a Bathroom Remodel

Intermediate

30 minutes

2/4 Inventory

A comprehensive guide to safely disconnecting the plumbing, detaching an old bathtub from its alcove, and removing it from the bathroom as part of a remodel. This process includes shutting off the water supply, disconnecting the drain and overflow assembly, removing the tub surround, and finally, extracting the tub itself.

Based on content fromHome Repair Tutor· 671K subscribers

Frequently Asked Questions

What are the most critical safety precautions I should take before and during bathtub removal?

Always shut off the main water supply to your home and drain the lines before beginning. Wear safety glasses (HDX Indoor Safety Glasses), heavy-duty gloves (Husky Large Heavy Duty Glove), and a respirator (3M P100 Household Respirator) to protect against dust, debris, and potential mold. Ensure the work area is well-ventilated, and if using power tools, keep cords away from water and work carefully.

Do I really need specialized tools like a tub drain wrench or a reciprocating saw, or can I get by with standard tools?

A tub drain wrench (like the Husky Double Ended Tub Drain Wrench) is highly recommended for efficiently removing the drain assembly without damaging the plumbing. While not always strictly necessary, a reciprocating saw with a demolition blade (like DIABLO Demo Demon) can significantly ease the removal of difficult tubs, especially heavy cast iron ones, by cutting them into manageable pieces. A pry bar (Stanley 12 in. Wonder Bar Pry Bar) is also essential for detaching the tub.

How long does a typical bathtub removal project take for an intermediate DIYer, and is it a one-person job?

For an intermediate DIYer, removing a bathtub typically takes 4-8 hours, depending on the tub type, access to plumbing, and unexpected issues. While some initial steps can be done solo, extracting the tub itself, especially if it's cast iron, often requires at least two people due to its weight and bulk to prevent injury or damage.

What are common pitfalls or mistakes to avoid when disconnecting plumbing or detaching the tub from the wall?

A common mistake is not completely shutting off the water or checking for remaining pressure before disconnecting pipes, leading to leaks. Another is forcefully prying without locating all securing points (like nailing flanges behind the surround), which can damage surrounding walls or the subfloor. Always double-check for hidden screws or mortar that might still be holding the tub in place.