Test the Flush — Check for a Partial Drain Clog
Part of project
How to Troubleshoot a Weak Flushing Toilet · Step 5 of 5
In this video
With the auger fully retracted and removed from the toilet bowl, perform a test flush. The toilet should flush completely and the water should drain freely, indicating that the clog has been successfully cleared. If the toilet still does not flush properly, repeat the augering process.
Goal: Verify clog is cleared
- In some cases, you may need to repeat the entire process two or three times to completely clear a stubborn blockage.
5.2M subscribers
FAQs
Do I need all the specialized tools listed, or can I manage this project with basic household items?
Many common issues can be resolved with a sponge, bucket, and some vinegar, which you likely already own. Specialized tools like the inspection mirror or toilet auger are useful for more stubborn problems or diagnosis, but you might be able to borrow them or try simpler steps first. The auger is essential if you suspect a partial drain clog.
What's the most important safety precaution I need to take before starting any work on my toilet?
The most crucial step is to shut off the water supply to the toilet using the valve behind or near the base of the toilet. After that, flush the toilet to empty the tank and bowl as much as possible. This prevents unexpected leaks and provides a dry, safe working environment.
I'm a beginner; is troubleshooting a weak flush really manageable for me, and will it take the full 3 hours?
Yes, this project is designed for beginners, as most common causes are simple visual checks and minor adjustments. The 3-hour estimate accounts for diagnosing various potential issues and performing all possible fixes like cleaning jets or using an auger. Simple fixes, such as adjusting the water level or lift chain, can take as little as 15-30 minutes.
I've checked the water level and cleaned the rim jets, but my toilet still flushes weakly. What's the next most likely culprit?
If adjusting the water level and cleaning the jets haven't worked, the next common issue is often the flapper or the lift chain. Check if the flapper is sealing properly, has any tears, or if its chain is too long or short. If those are fine, a partial drain clog is likely, which will require a toilet auger.
Test the Flush — Check for a Partial Drain Clog
Part of project
How to Troubleshoot a Weak Flushing Toilet · Step 5 of 5
In this video
With the auger fully retracted and removed from the toilet bowl, perform a test flush. The toilet should flush completely and the water should drain freely, indicating that the clog has been successfully cleared. If the toilet still does not flush properly, repeat the augering process.
Goal: Verify clog is cleared
- In some cases, you may need to repeat the entire process two or three times to completely clear a stubborn blockage.
Frequently Asked Questions
Do I need all the specialized tools listed, or can I manage this project with basic household items?
Many common issues can be resolved with a sponge, bucket, and some vinegar, which you likely already own. Specialized tools like the inspection mirror or toilet auger are useful for more stubborn problems or diagnosis, but you might be able to borrow them or try simpler steps first. The auger is essential if you suspect a partial drain clog.
What's the most important safety precaution I need to take before starting any work on my toilet?
The most crucial step is to shut off the water supply to the toilet using the valve behind or near the base of the toilet. After that, flush the toilet to empty the tank and bowl as much as possible. This prevents unexpected leaks and provides a dry, safe working environment.
I'm a beginner; is troubleshooting a weak flush really manageable for me, and will it take the full 3 hours?
Yes, this project is designed for beginners, as most common causes are simple visual checks and minor adjustments. The 3-hour estimate accounts for diagnosing various potential issues and performing all possible fixes like cleaning jets or using an auger. Simple fixes, such as adjusting the water level or lift chain, can take as little as 15-30 minutes.
I've checked the water level and cleaned the rim jets, but my toilet still flushes weakly. What's the next most likely culprit?
If adjusting the water level and cleaning the jets haven't worked, the next common issue is often the flapper or the lift chain. Check if the flapper is sealing properly, has any tears, or if its chain is too long or short. If those are fine, a partial drain clog is likely, which will require a toilet auger.