Turn Off Cold Water Supply — Shut Off the Water Supply
Part of project
How to Replace Washing Machine Supply Hoses · Step 2 of 6
In this video
First, locate the cold water supply line, which is typically on the right side when facing the water heater. Follow this pipe until you find its shut-off valve. Turn the valve handle clockwise, or to the right, until it stops turning. This will stop the flow of new water into the tank.
Goal: Shut off water supply
- On most water heaters, the cold water inlet is on the right and the hot water outlet is on the left.
729K subscribers
FAQs
How do I safely turn off the water supply and prepare the area to prevent water damage?
Locate the hot and cold water shut-off valves behind the washing machine, or the main water shut-off for your home if individual valves aren't present. Turn them completely clockwise until the water flow stops. Place a bucket and several absorbent towels (like the FRESHFOLDS set or ITOPFOX paper towels) under and around the hose connections to catch residual water during disconnection.
Do I really need specialized tools like Channellock pliers, and what type of new hoses are recommended?
Yes, Channellock 10 in. Tongue and Groove Pliers are highly recommended for their grip and adjustable jaws, making it easier to loosen stubborn, old hose connections without stripping them. For new hoses, durable options like the Fluidmaster Universal Braided Stainless High Efficiency Hoses or UDP Steel Braid Reinforced Hoses are excellent choices, as they are less prone to bursting than standard rubber hoses.
What are the most common mistakes beginners make when disconnecting old hoses or installing new ones, and how can I avoid leaks?
A common mistake is not fully draining the old hoses before disconnecting, leading to spills. Ensure all water is off and use a bucket. When installing new hoses, make sure the rubber washers are properly seated in the fittings. Hand-tighten first, then use your Channellock pliers for an additional half-turn to three-quarters turn; overtightening can strip threads, while undertightening causes leaks.
Is this project truly 'beginner' level, and is the 2-hour estimated time accurate for someone new to plumbing?
Yes, this project is considered beginner-friendly as it primarily involves turning valves and using pliers. The 2-hour estimate is reasonable for most, but if your old hoses are seized or difficult to access, it may take a bit longer. Take your time, especially during the final leak check, to ensure everything is secure.
Turn Off Cold Water Supply — Shut Off the Water Supply
Part of project
How to Replace Washing Machine Supply Hoses · Step 2 of 6
In this video
First, locate the cold water supply line, which is typically on the right side when facing the water heater. Follow this pipe until you find its shut-off valve. Turn the valve handle clockwise, or to the right, until it stops turning. This will stop the flow of new water into the tank.
Goal: Shut off water supply
- On most water heaters, the cold water inlet is on the right and the hot water outlet is on the left.
Frequently Asked Questions
How do I safely turn off the water supply and prepare the area to prevent water damage?
Locate the hot and cold water shut-off valves behind the washing machine, or the main water shut-off for your home if individual valves aren't present. Turn them completely clockwise until the water flow stops. Place a bucket and several absorbent towels (like the FRESHFOLDS set or ITOPFOX paper towels) under and around the hose connections to catch residual water during disconnection.
Do I really need specialized tools like Channellock pliers, and what type of new hoses are recommended?
Yes, Channellock 10 in. Tongue and Groove Pliers are highly recommended for their grip and adjustable jaws, making it easier to loosen stubborn, old hose connections without stripping them. For new hoses, durable options like the Fluidmaster Universal Braided Stainless High Efficiency Hoses or UDP Steel Braid Reinforced Hoses are excellent choices, as they are less prone to bursting than standard rubber hoses.
What are the most common mistakes beginners make when disconnecting old hoses or installing new ones, and how can I avoid leaks?
A common mistake is not fully draining the old hoses before disconnecting, leading to spills. Ensure all water is off and use a bucket. When installing new hoses, make sure the rubber washers are properly seated in the fittings. Hand-tighten first, then use your Channellock pliers for an additional half-turn to three-quarters turn; overtightening can strip threads, while undertightening causes leaks.
Is this project truly 'beginner' level, and is the 2-hour estimated time accurate for someone new to plumbing?
Yes, this project is considered beginner-friendly as it primarily involves turning valves and using pliers. The 2-hour estimate is reasonable for most, but if your old hoses are seized or difficult to access, it may take a bit longer. Take your time, especially during the final leak check, to ensure everything is secure.