Remove the Toilet Tank — Prepare the Work Area
Part of project
How to Use a Toilet Auger to Clear a Stubborn Clog · Step 1 of 5
In this video
Place a small bucket or towel under the water supply line connection to catch any drips. Use a wrench to loosen and disconnect the water supply line from the bottom of the fill valve. Next, locate the two tank bolts under the rim of the toilet bowl. Use a wrench or socket to unscrew the nuts from these bolts. Once the nuts and washers are removed, carefully lift the toilet tank straight up and off the bowl. Place it on a protected surface like a towel.
Goal: Detach the toilet tank from the toilet bowl.
- The tank is made of porcelain and can be heavy and fragile. Handle it with care to avoid dropping or cracking it.
Used in this video
- Wrench (brand: unknown, Wrench Type: Open-end) — Loosening the supply line nut and the tank bolt nuts.
- Towel (brand: unknown, Towel Material: Absorbent cloth towel) — Protecting the floor and providing a soft surface to place the tank on.
614K subscribers
FAQs
What essential safety precautions and preparatory steps should I take before using a toilet auger?
Always wear heavy-duty latex gloves to protect your hands from dirty water and potential germs. Lay down drop cloths (like the Everbilt or HDX ones listed) around the toilet to protect your floor from splashes and scratches, and have a 5-gallon bucket nearby to catch any water when retracting the auger.
Why do I need a specialized toilet auger instead of a regular drain snake, and what's the main difference?
A specialized toilet auger, also known as a closet auger, is designed with a protective rubber or plastic sleeve over the cable to prevent scratching the porcelain bowl of your toilet. Regular drain snakes lack this protection and can easily damage the toilet's finish, leading to costly repairs.
How difficult is this project for a DIY beginner, and how much time should I allocate?
This is considered a beginner-friendly project. Most clogs can be cleared in about 15-30 minutes, assuming the auger works effectively. Take your time, especially when inserting and cranking the auger, to avoid damaging the toilet.
What should I do if the auger doesn't seem to be clearing the clog or gets stuck?
If the auger doesn't clear the clog, try rotating the handle in both directions and gently pushing and pulling to break up the obstruction. Avoid excessive force, which can damage your toilet or the auger. If the auger gets stuck, try to gently retract and re-insert it, rotating as you go.
Remove the Toilet Tank — Prepare the Work Area
Part of project
How to Use a Toilet Auger to Clear a Stubborn Clog · Step 1 of 5
In this video
Place a small bucket or towel under the water supply line connection to catch any drips. Use a wrench to loosen and disconnect the water supply line from the bottom of the fill valve. Next, locate the two tank bolts under the rim of the toilet bowl. Use a wrench or socket to unscrew the nuts from these bolts. Once the nuts and washers are removed, carefully lift the toilet tank straight up and off the bowl. Place it on a protected surface like a towel.
Goal: Detach the toilet tank from the toilet bowl.
- The tank is made of porcelain and can be heavy and fragile. Handle it with care to avoid dropping or cracking it.
Used in this video
- Wrench (brand: unknown, Wrench Type: Open-end) — Loosening the supply line nut and the tank bolt nuts.
- Towel (brand: unknown, Towel Material: Absorbent cloth towel) — Protecting the floor and providing a soft surface to place the tank on.
Frequently Asked Questions
What essential safety precautions and preparatory steps should I take before using a toilet auger?
Always wear heavy-duty latex gloves to protect your hands from dirty water and potential germs. Lay down drop cloths (like the Everbilt or HDX ones listed) around the toilet to protect your floor from splashes and scratches, and have a 5-gallon bucket nearby to catch any water when retracting the auger.
Why do I need a specialized toilet auger instead of a regular drain snake, and what's the main difference?
A specialized toilet auger, also known as a closet auger, is designed with a protective rubber or plastic sleeve over the cable to prevent scratching the porcelain bowl of your toilet. Regular drain snakes lack this protection and can easily damage the toilet's finish, leading to costly repairs.
How difficult is this project for a DIY beginner, and how much time should I allocate?
This is considered a beginner-friendly project. Most clogs can be cleared in about 15-30 minutes, assuming the auger works effectively. Take your time, especially when inserting and cranking the auger, to avoid damaging the toilet.
What should I do if the auger doesn't seem to be clearing the clog or gets stuck?
If the auger doesn't clear the clog, try rotating the handle in both directions and gently pushing and pulling to break up the obstruction. Avoid excessive force, which can damage your toilet or the auger. If the auger gets stuck, try to gently retract and re-insert it, rotating as you go.