Retract and Remove Auger — Test Flush and Clean Up
Part of project
How to Use a Toilet Auger to Clear a Stubborn Clog · Step 6 of 6
In this video
After successfully clearing the clog, you need to remove the auger. Begin rotating the handle in a counter-clockwise direction while simultaneously pulling the handle up and away from the shaft. This retracts the snake back into the protective guide tube. Once the cable is fully retracted, carefully lift the entire auger out of the toilet bowl. Be mindful of dripping water and debris.
Goal: Remove the auger from the toilet
- The auger head will be wet and may have debris on it. Remove it carefully to avoid splashing dirty water.
Used in this video
- Toilet Auger (brand: Unspecified, Tool Type: Plumbing Tools, Power Source: Manual, Material: Metal, Plastic, Auger Type: Toilet auger, Cable Length: Short, Protective Features: Rubber boot to prevent scratching the toilet bowl) — To be removed from the toilet.
614K subscribers
FAQs
Why can't I just use a standard drain snake instead of a specialized toilet auger?
Standard drain snakes have exposed metal cables that can easily scratch or even crack the porcelain of your toilet bowl. A toilet auger, also known as a closet auger, is specifically designed with a protective sleeve or a curved head to navigate the toilet's S-trap without damaging its delicate surface.
What's the most common mistake beginners make when using a toilet auger, and how can I avoid it?
A common mistake is forcing the auger or retracting it too quickly. Instead, allow the auger to follow the toilet's natural curves and apply gentle, consistent pressure while cranking to work through the clog. When retracting, do so slowly to avoid pulling the obstruction back into the drain or causing splashes.
How do I know if the clog is too deep for a toilet auger, or when should I call a professional plumber?
A typical toilet auger is 3 to 6 feet long, designed for clogs within or just past the toilet's internal trap. If the auger extends its full length without clearing the clog, or if you notice other drains in your home are also backed up, the issue is likely further down your main drain line. In these cases, it's best to contact a professional plumber.
Is there a risk of damaging my toilet bowl with an auger, and how can I prevent it?
Yes, improper use can lead to scratching or, in rare cases, cracking the porcelain. Always ensure the auger's protective vinyl sleeve is properly seated against the toilet bowl before extending the cable. Guide the auger gently and avoid aggressive force against the porcelain surface.
Retract and Remove Auger — Test Flush and Clean Up
Part of project
How to Use a Toilet Auger to Clear a Stubborn Clog · Step 6 of 6
In this video
After successfully clearing the clog, you need to remove the auger. Begin rotating the handle in a counter-clockwise direction while simultaneously pulling the handle up and away from the shaft. This retracts the snake back into the protective guide tube. Once the cable is fully retracted, carefully lift the entire auger out of the toilet bowl. Be mindful of dripping water and debris.
Goal: Remove the auger from the toilet
- The auger head will be wet and may have debris on it. Remove it carefully to avoid splashing dirty water.
Used in this video
- Toilet Auger (brand: Unspecified, Tool Type: Plumbing Tools, Power Source: Manual, Material: Metal, Plastic, Auger Type: Toilet auger, Cable Length: Short, Protective Features: Rubber boot to prevent scratching the toilet bowl) — To be removed from the toilet.
Frequently Asked Questions
Why can't I just use a standard drain snake instead of a specialized toilet auger?
Standard drain snakes have exposed metal cables that can easily scratch or even crack the porcelain of your toilet bowl. A toilet auger, also known as a closet auger, is specifically designed with a protective sleeve or a curved head to navigate the toilet's S-trap without damaging its delicate surface.
What's the most common mistake beginners make when using a toilet auger, and how can I avoid it?
A common mistake is forcing the auger or retracting it too quickly. Instead, allow the auger to follow the toilet's natural curves and apply gentle, consistent pressure while cranking to work through the clog. When retracting, do so slowly to avoid pulling the obstruction back into the drain or causing splashes.
How do I know if the clog is too deep for a toilet auger, or when should I call a professional plumber?
A typical toilet auger is 3 to 6 feet long, designed for clogs within or just past the toilet's internal trap. If the auger extends its full length without clearing the clog, or if you notice other drains in your home are also backed up, the issue is likely further down your main drain line. In these cases, it's best to contact a professional plumber.
Is there a risk of damaging my toilet bowl with an auger, and how can I prevent it?
Yes, improper use can lead to scratching or, in rare cases, cracking the porcelain. Always ensure the auger's protective vinyl sleeve is properly seated against the toilet bowl before extending the cable. Guide the auger gently and avoid aggressive force against the porcelain surface.