Drain the water heater — Connect Drain Hose
Part of project
How to Flush a Water Heater to Stop Popping Noises · Step 3 of 8
In this video
First, locate and turn off the cold water supply valve leading to the water heater. Attach a garden hose to the drain valve at the bottom of the tank and run the other end of the hose to a safe drainage area, such as outside or into a floor drain. To allow air into the tank so it can drain, open a hot water faucet somewhere in the house or flip the lever on the temperature and pressure relief valve (T&P valve) to the open position. Finally, open the drain valve, often using a flathead screwdriver to turn the knob, and let the tank drain completely.
Goal: Empty Water Heater Tank
Used in this video
- Work Gloves (Tool Type: Hand Tools) — Protecting hands.
- Flathead Screwdriver (Tool Type: Hand Tools, Screwdriver Type: Flathead) · optional — Turning the knob on a slot-style drain valve to open it.
662K subscribers
FAQs
My water heater is still making popping noises after I flushed it. What could be wrong?
Persistent popping often indicates either severe, compacted sediment that wasn't fully removed, or a failing heating element (in electric heaters) overheating due to mineral buildup. You might need to attempt another flush, or consider professional assistance as elements may need replacement.
What are the most important safety steps I absolutely cannot skip when flushing my water heater?
Crucially, always *completely* shut off the power (for electric) or gas supply (for gas heaters) *before* you begin. Wear safety glasses and heavy-duty gloves to protect against hot water and debris. Ensure the water has cooled sufficiently before draining.
Do I need specialized tools like "heavy-duty" hoses, or can I use a standard garden hose for this project?
While a standard garden hose can drain, a heavy-duty hose is recommended for its durability and resistance to hot water, especially during the flushing bursts. The specialized drain valves mentioned are for *replacement* if your current one is faulty, not necessarily for the flush itself.
I've followed the steps, but no water is coming out when I open the drain valve. What should I do?
First, verify the cold water supply is off and a hot water faucet in your house is open to relieve pressure. The drain valve itself is likely clogged with sediment; try gently poking the valve opening with a stiff wire to dislodge the blockage. If it's completely seized, the valve may need replacement.
Drain the water heater — Connect Drain Hose
Part of project
How to Flush a Water Heater to Stop Popping Noises · Step 3 of 8
In this video
First, locate and turn off the cold water supply valve leading to the water heater. Attach a garden hose to the drain valve at the bottom of the tank and run the other end of the hose to a safe drainage area, such as outside or into a floor drain. To allow air into the tank so it can drain, open a hot water faucet somewhere in the house or flip the lever on the temperature and pressure relief valve (T&P valve) to the open position. Finally, open the drain valve, often using a flathead screwdriver to turn the knob, and let the tank drain completely.
Goal: Empty Water Heater Tank
Used in this video
- Work Gloves (Tool Type: Hand Tools) — Protecting hands.
- Flathead Screwdriver (Tool Type: Hand Tools, Screwdriver Type: Flathead) · optional — Turning the knob on a slot-style drain valve to open it.
Frequently Asked Questions
My water heater is still making popping noises after I flushed it. What could be wrong?
Persistent popping often indicates either severe, compacted sediment that wasn't fully removed, or a failing heating element (in electric heaters) overheating due to mineral buildup. You might need to attempt another flush, or consider professional assistance as elements may need replacement.
What are the most important safety steps I absolutely cannot skip when flushing my water heater?
Crucially, always *completely* shut off the power (for electric) or gas supply (for gas heaters) *before* you begin. Wear safety glasses and heavy-duty gloves to protect against hot water and debris. Ensure the water has cooled sufficiently before draining.
Do I need specialized tools like "heavy-duty" hoses, or can I use a standard garden hose for this project?
While a standard garden hose can drain, a heavy-duty hose is recommended for its durability and resistance to hot water, especially during the flushing bursts. The specialized drain valves mentioned are for *replacement* if your current one is faulty, not necessarily for the flush itself.
I've followed the steps, but no water is coming out when I open the drain valve. What should I do?
First, verify the cold water supply is off and a hot water faucet in your house is open to relieve pressure. The drain valve itself is likely clogged with sediment; try gently poking the valve opening with a stiff wire to dislodge the blockage. If it's completely seized, the valve may need replacement.