stesso

Project

Take the plastic toilet shims and firmly push them into the gaps you identified. Slide the thin end in first. Add shims around the toilet base as needed until the toilet sits firmly on the floor and does not rock or wobble in any direction. Some shims are designed to be stackable if you have a larger gap. Push them in by hand; you should not need a tool. Be careful not to force them in so hard that you lift the toilet, as this can break the wax ring seal.

You're viewing a step from: How to Secure a Wobbly Toilet with Shims

Beginner

2 hours

2/4 Inventory

This guide provides step-by-step instructions for diagnosing and fixing a wobbly toilet using plastic shims. The process involves checking the closet bolts first, then inserting and trimming shims to stabilize the toilet, and finally sealing the base with caulk for a clean, secure finish.

Based on content fromWINNI· 846K subscribers

Frequently Asked Questions

How do I know if my wobbly toilet needs shims or a more serious repair?

Shims are ideal for minor rocking caused by uneven flooring or a slight gap at the base. If the wobbling is significant, accompanied by leaks, or if the toilet moves freely from the floor, you might have loose flange bolts, a damaged wax ring, or a compromised subfloor, which requires more extensive repair than just shims.

Is this project truly 'beginner' level, and can it realistically be completed in 2 hours?

Yes, securing a wobbly toilet with shims is a beginner-friendly DIY task. Most of the time is spent diagnosing, inserting shims, and applying caulk. With the recommended tools and materials, a novice can typically complete it within the estimated 2 hours, assuming no unexpected issues like a broken flange.

Do I need to buy all the specific tools listed, or are there acceptable alternatives?

While the listed tools like a utility knife and adjustable wrench are highly recommended for efficiency and safety, some generic equivalents can work. For example, a basic screwdriver set can replace the specialized flathead, and any sharp utility knife will trim shims. However, a good caulk gun is essential for a clean, professional finish.

What are the most common mistakes to avoid when shimming a toilet, and how do I prevent them?

A common mistake is overtightening closet bolts, which can crack the toilet base. Another is not checking all sides for gaps, leading to uneven shimming. Prevent this by gently hand-tightening bolts first, then incrementally shimming around the entire base until the toilet is stable, ensuring even contact.