Install and Orient the New Stopper — Adjust the Stopper Height via the Clevis Screw

Beginner

Part of project

How to Adjust a Bathroom Sink Pop-Up Drain Stopper · Step 4 of 6

Helpful?

In this video

Insert the new stopper into the drain. Before re-installing the pivot rod, decide if you want the stopper to be removable. For a non-removable stopper, align the hole in the stopper's tail so the pivot rod will pass through it. For a removable stopper, turn the tail 90 degrees so the pivot rod will sit underneath the hole, allowing the stopper to be lifted out at any time.

Goal: Position new stopper

761.5K views16.6K2 minutes

MrKistel

58K subscribers

View Channel

FAQs

What specific tools are essential for this pop-up drain adjustment, and why are so many types of towels mentioned?

You'll primarily need a screwdriver (Phillips or flathead, matching your clevis screw) and a bucket to catch any drips. The various towels are listed for cleaning, protecting your cabinet, and absorbing spills, but any absorbent cloth you have on hand will work perfectly for this beginner-friendly project.

How long should I expect this project to take, and is it truly suitable for a beginner DIYer?

This project is very beginner-friendly and typically takes only 15-30 minutes once you've identified the components. It's a quick fix that doesn't require extensive plumbing knowledge or special tools, making it an excellent starting point for home improvement.

After adjusting, my stopper still leaks or won't fully open/close. What should I troubleshoot next?

First, remove and thoroughly clean the stopper and the drain opening to eliminate debris. Then, double-check that the pivot rod and clevis strap are securely connected and not binding. Make small, precise adjustments to the clevis screw, testing after each increment, as over-tightening or incorrect positioning can cause issues.

Are there any important safety precautions I should take before working under the sink?

While this adjustment doesn't usually involve disconnecting water lines, it's wise to have a bucket handy for unexpected drips. Ensure you have adequate lighting under the sink to clearly see the components. Be cautious of sharp edges or tight spaces to avoid minor injuries.

Transcript

Hide

you get a hold of it insert the new stopper when you install the new stopper you can choose to make it removable or non- removable if you line up the loop in the stopper so that the pivot rod goes through it it'll be non- removable if you turn it 90° and put the pivot Rod through then it'll be removable and it'll raise up and down by writing on top of the end of the pivot Rod install the pivot Rod into the

Auto-generated transcript. May contain errors.