You'll primarily need a screwdriver (Phillips or flathead, matching your clevis screw) and a bucket to catch any drips. The various towels are listed for cleaning, protecting your cabinet, and absorbing spills, but any absorbent cloth you have on hand will work perfectly for this beginner-friendly project.

This project is very beginner-friendly and typically takes only 15-30 minutes once you've identified the components. It's a quick fix that doesn't require extensive plumbing knowledge or special tools, making it an excellent starting point for home improvement.

First, remove and thoroughly clean the stopper and the drain opening to eliminate debris. Then, double-check that the pivot rod and clevis strap are securely connected and not binding. Make small, precise adjustments to the clevis screw, testing after each increment, as over-tightening or incorrect positioning can cause issues.

While this adjustment doesn't usually involve disconnecting water lines, it's wise to have a bucket handy for unexpected drips. Ensure you have adequate lighting under the sink to clearly see the components. Be cautious of sharp edges or tight spaces to avoid minor injuries.