stesso

Project

With the installation complete, it's time to test. Plug the pump's power cord back into the GFCI outlet. Use a hose or buckets to slowly pour water into the sump pit. As the water level rises, it will lift the float switch. When the float reaches its activation height, the pump should turn on with a hum. Watch as it quickly pumps the water out of the pit. The pump should shut off automatically as the float switch drops with the water level. During this test, carefully inspect all the connections, especially around the new check valve, for any signs of leaks.

You're viewing a step from: How to Replace a Submersible Sump Pump

Beginner

6 hours

2/4 Inventory

This project involves safely disconnecting and removing an old submersible sump pump from a sump pit, preparing and installing a new pump, connecting it to the existing discharge plumbing, and testing its operation to ensure it effectively prevents basement flooding.

Based on content fromThis Old House· 2.2M subscribers

Frequently Asked Questions

What is the single most critical safety precaution I must take before starting to replace my submersible sump pump?

Always disconnect power to the sump pump circuit by unplugging it or turning off the dedicated breaker at your electrical panel. This prevents accidental electrocution, especially since you'll be working with an electrical appliance in a potentially wet environment. Confirm the power is off using a voltage tester if you're unsure.

The project is listed as 'beginner' and 6 hours. Can I really complete this if I'm new to DIY, and what factors might make it take longer?

Yes, a beginner can successfully replace a sump pump, but taking your time is key. Factors like rusted or seized discharge pipe connections, a very dirty sump pit requiring extensive cleaning, or unexpected plumbing modifications can extend the project beyond 6 hours. Having all your tools and materials ready beforehand will help streamline the process.

Besides the listed tools, are there any other specialized items or tools that would make replacing the sump pump easier or more efficient?

While the listed tools cover the basics, a shop vacuum can be incredibly useful for thoroughly cleaning out a dirty sump pit before installing the new pump. Additionally, a hacksaw or reciprocating saw might be more effective than a PVC cutter if you encounter old, rigid, or difficult-to-reach piping that needs to be cut.

How do I ensure I select the correct replacement submersible sump pump for my existing pit and discharge system?

Before purchasing, measure your old pump's dimensions (height, width), horsepower (HP), and discharge pipe diameter (commonly 1.25" or 1.5"). Also, note the type of float switch (tethered or vertical). Matching these specifications will ensure your new pump fits properly in the sump basin and connects easily to your existing plumbing.