stesso

Project

Once everything has been cleaned and the hose is reconnected, reassemble the air gap on top of the sink. Place the plastic cap back on, followed by the decorative cover (screw or snap it back into place). To test your work, run your dishwasher on a 'Rinse' or 'Drain' cycle. This will force water through the system. Watch the air gap closely to ensure no water leaks from the top. Also, check under the sink to make sure the hose connection you worked on is dry and not leaking.

You're viewing a step from: How to Clean or Replace a Dishwasher Air Gap

Beginner

3 hours

2/4 Inventory

This guide provides comprehensive, step-by-step instructions for troubleshooting a common dishwasher drainage problem: a clogged or faulty air gap. The process involves inspecting the air gap, performing a thorough cleaning of the cap, body, and connected hoses, and if necessary, completely replacing the air gap unit with a new one.

Based on content fromThis Old House· 2.2M subscribers

Frequently Asked Questions

What are the essential tools I need for this project, and are there alternatives for the specific brands listed?

While specific brands are listed, the core tools required are pliers, a standard screwdriver (multi-bit is handy), and a scrub brush for cleaning. You will also need a reliable flashlight, a bucket, and plenty of towels or rags to manage spills. Any good quality versions of these basic tools will suffice.

What crucial safety precautions should I take before I start working on my dishwasher air gap?

The most important safety step is to disconnect power to your dishwasher at the circuit breaker before you begin to prevent electrical shock. Also, wear gloves to protect your hands from potential grime and use the bucket and towels to contain any water that might spill during the process.

Is this project truly beginner-friendly, and how much time should I realistically set aside?

Yes, this project is rated as beginner difficulty, primarily involving basic hand tool use. While the estimated time is 3 hours, a simple cleaning often takes less than an hour. A full replacement might take closer to 1-2 hours depending on how easily the old unit removes and the new one installs.

I've thoroughly cleaned my air gap, but my dishwasher is still not draining properly. What else could be the problem?

If cleaning the air gap didn't fix the issue, the blockage might be further down the drain line or within the dishwasher itself. First, check the drain hose that connects from the air gap to your sink's drain connection for kinks or clogs. If that's clear, you may need to inspect the dishwasher's internal drain filter or pump.