Restore Power and Reset Unit — Press the Reset Button
Part of project
How to Fix a Humming or Jammed Garbage Disposal · Step 5 of 7
In this video
Once the jam is cleared, restore power by plugging the disposal's power cord back into the wall outlet. Then, locate the small, red circuit breaker reset button on the bottom of the disposal unit. Press this button firmly until it clicks and stays recessed. This resets the motor's internal overload protector, which likely tripped during the jam.
Goal: Reconnect the disposal to power and reset its internal circuit breaker
- If the reset button does not stay in, the motor may still be too hot. Wait a few minutes for it to cool down, then try pressing it again.
713K subscribers
FAQs
What is the most crucial safety step before I start, and why?
The most crucial safety step is to ALWAYS disconnect power to the garbage disposal at your home's circuit breaker before performing any work. This prevents the unit from accidentally turning on, which could lead to severe injury while your hands or tools are inside the disposal.
My disposal is humming but not grinding; does this mean it's jammed, and how is that different from a complete jam?
Yes, a humming disposal almost always indicates it's jammed. The motor is receiving power but cannot turn the grinding plates due to an obstruction. A 'complete jam' means the motor isn't even humming, often indicating the reset button has tripped due to overload.
Do I need all the specific tools listed, like the specialized wrench, or are there alternatives for clearing a jam?
While the project lists a general wrench and a precision screwdriver, the most critical tool for freeing a jam from below is a 1/4-inch hex key or Allen wrench, which often comes with new disposals. A strong flashlight like the Panther Vision FLATEYE is highly recommended for visibility, and tongs or pliers are great for removing items from above instead of your hand.
I've pressed the reset button, but my disposal still won't work or just hums again. What should I do next?
If the reset button immediately trips again or the disposal hums but doesn't spin, it likely means the obstruction hasn't been fully cleared, or there's a more serious electrical issue. Go back to step 3 to thoroughly ensure no items are obstructing the grinding plates and try manually turning the flywheel again with the hex key. If problems persist, it might be time to call a plumber.
Restore Power and Reset Unit — Press the Reset Button
Part of project
How to Fix a Humming or Jammed Garbage Disposal · Step 5 of 7
In this video
Once the jam is cleared, restore power by plugging the disposal's power cord back into the wall outlet. Then, locate the small, red circuit breaker reset button on the bottom of the disposal unit. Press this button firmly until it clicks and stays recessed. This resets the motor's internal overload protector, which likely tripped during the jam.
Goal: Reconnect the disposal to power and reset its internal circuit breaker
- If the reset button does not stay in, the motor may still be too hot. Wait a few minutes for it to cool down, then try pressing it again.
Frequently Asked Questions
What is the most crucial safety step before I start, and why?
The most crucial safety step is to ALWAYS disconnect power to the garbage disposal at your home's circuit breaker before performing any work. This prevents the unit from accidentally turning on, which could lead to severe injury while your hands or tools are inside the disposal.
My disposal is humming but not grinding; does this mean it's jammed, and how is that different from a complete jam?
Yes, a humming disposal almost always indicates it's jammed. The motor is receiving power but cannot turn the grinding plates due to an obstruction. A 'complete jam' means the motor isn't even humming, often indicating the reset button has tripped due to overload.
Do I need all the specific tools listed, like the specialized wrench, or are there alternatives for clearing a jam?
While the project lists a general wrench and a precision screwdriver, the most critical tool for freeing a jam from below is a 1/4-inch hex key or Allen wrench, which often comes with new disposals. A strong flashlight like the Panther Vision FLATEYE is highly recommended for visibility, and tongs or pliers are great for removing items from above instead of your hand.
I've pressed the reset button, but my disposal still won't work or just hums again. What should I do next?
If the reset button immediately trips again or the disposal hums but doesn't spin, it likely means the obstruction hasn't been fully cleared, or there's a more serious electrical issue. Go back to step 3 to thoroughly ensure no items are obstructing the grinding plates and try manually turning the flywheel again with the hex key. If problems persist, it might be time to call a plumber.