Skip to main content
Stesso
BrowseMy ProjectsBlog
Log inSign up
Stesso

Step 5 · Reassemble and Test for Leaks

Reinstall the handle, escutcheon, and shower head. Slowly turn the water supply back on, carefully checking all connections for leaks. If leaks persist, tighten connections or reapply Teflon tape as needed. Run the shower for several minutes to fully test.

Stesso
BrowseMy Projects
Sign in

Step 5 · Reassemble and Test for Leaks

Reinstall the handle, escutcheon, and shower head. Slowly turn the water supply back on, carefully checking all connections for leaks. If leaks persist, tighten connections or reapply Teflon tape as needed. Run the shower for several minutes to fully test.

← Project

Shower Faucet Valve Replacement: A Step-by-Step DIY Guide

Step 5 of 5·30 min left

Turn Off the Water Supply
5 minsBeginner
Remove the Shower Handle and Escutcheon
15 mins1 itemsIntermediate
Remove the Old Shower Valve
30 mins1 itemsAdvanced
Install the New Shower Valve
30 mins1 itemsAdvanced
5
Reassemble and Test for Leaks
30 minsIntermediate
PrevNext