Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 5 · Final Inspection and Touch-ups

Once all balusters are installed, go back over each one. Check for stability by gently pushing and pulling on them to ensure they are firmly attached and do not wobble. Verify that spacing is consistent and meets code. Inspect for any cosmetic imperfections, such as scuff marks from installation, and touch up paint or finishes as needed. Clean the entire area.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Final Inspection and Touch-ups

Once all balusters are installed, go back over each one. Check for stability by gently pushing and pulling on them to ensure they are firmly attached and do not wobble. Verify that spacing is consistent and meets code. Inspect for any cosmetic imperfections, such as scuff marks from installation, and touch up paint or finishes as needed. Clean the entire area.

Videos for this step

Final Alignment and Quality ControlFinal Inspection and FinishingFinal Inspection and Wrap-up

Tools and Materials

← Project

How to Replace Wood Balusters with Iron Balusters

Step 5 of 5·30 min left

Measure and Mark for New Baluster Spacing
60 minutes5 items
Remove Existing Wooden Balusters
90 minutes6 items
Prepare Mounting Surfaces
45 minutes6 items
Install New Iron Balusters
120 minutes7 items
5
Final Inspection and Touch-ups
30 minutes3 items
PrevNext
TermsPrivacySafetyLegal© 2026 Stesso, Inc.