Carefully remove your existing shower trim kit. This usually involves unscrewing the handles, escutcheon plate, and showerhead. Consult your existing trim kit's instructions if needed. Take photos before disassembling to aid in reassembly.
Step 1
⏱ 2 min
Shut Off the Water Supply
Before you begin, safety first! Turn off the water supply to your shower. Locate the shut-off valves near the shower or turn off the main water supply to your house. A quick check to ensure the water is completely off prevents unexpected water damage.
Step 2
⏱ 2 minRemove the Old Shower Trim Kit
Step 3
⏱ 2 min
Install the New Moen Shower Trim Kit
Install the new Moen trim kit, following the manufacturer's instructions precisely. Typically, this involves installing the new handle, escutcheon plate, and showerhead. Ensure all components are securely tightened to prevent leaks.
Step 4
⏱ 2 min
Test for Leaks and Finalize
Turn the water supply back on slowly and carefully check all connections for leaks. If any leaks are detected, tighten connections or reinstall components as necessary. Run the shower for several minutes to ensure proper hot water flow and pressure.
Tool Needed
Screwdriver (Multi)
Step 2 of 4
Remove the Old Shower Trim Kit2 min