Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 6 · Cut Stringers

Carefully cut the stringers using a circular saw or handsaw, following the layout marks precisely. Make straight cuts for the riser faces and angled cuts for the tread nosings. For alternating tread stairs, this will involve creating a series of notches and angled cuts that accommodate the stepped tread design.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Cut Stringers

Carefully cut the stringers using a circular saw or handsaw, following the layout marks precisely. Make straight cuts for the riser faces and angled cuts for the tread nosings. For alternating tread stairs, this will involve creating a series of notches and angled cuts that accommodate the stepped tread design.

Videos for this step

Cutting StringersRough Cut Stair StringersCut the Stringer Boards

Tools and Materials

← Project

How to Measure Alternating Tread Stairs

Step 6 of 10·5 hr left

Determine Total Rise
15 minutes2 items
Calculate Nominal Riser Height
10 minutes1 items
Determine Total Run
15 minutes1 items
Calculate Tread Depth and Nosing
20 minutes2 items
Mark Stringers for Treads and Risers
60 minutes5 items
6
Cut Stringers
75 minutes4 items
7
Cut Treads
45 minutes4 items
8
Attach Stringers to Floor and Landing
30 minutes4 items
9
Install Treads
90 minutes4 items
10
Install Handrails and Guardrails
60 minutes5 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.