Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 6 · Connect to Power Supply

Determine the appropriate low-voltage power supply (e.g., 12V or 24V DC) based on your LED strips' requirements. Connect the wires from the LED run to the output terminals of the power supply. If the power supply requires plugging into an outlet, ensure this is done safely and in accordance with electrical codes. Secure all connections, possibly within a junction box if required.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Connect to Power Supply

Determine the appropriate low-voltage power supply (e.g., 12V or 24V DC) based on your LED strips' requirements. Connect the wires from the LED run to the output terminals of the power supply. If the power supply requires plugging into an outlet, ensure this is done safely and in accordance with electrical codes. Secure all connections, possibly within a junction box if required.

Videos for this step

Wiring and Power ConnectionConnect Power and TestConnect Wiring and Power Supply

Tools and Materials

← Project

How to Install Aluminum-Channel LED Lighting on Stair Nosings

Step 6 of 7·40 min left

Measure and Cut Aluminum Channels
30 minutes4 items
Prepare Stair Nosing Surface
15 minutes2 items
Install LED Strips into Channels
20 minutes2 items
Mount Aluminum Channels to Stair Nosing
45 minutes3 items
Connect LED Strips
40 minutes5 items
6
Connect to Power Supply
30 minutes4 items
7
Test the LED Lighting System
10 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.