Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 6 · Adjust Tension and Trim Ends

Once the rope is threaded and secured at both ends, check the overall tension. The handrail should feel firm and provide adequate support without sagging significantly. If necessary, untie and re-secure one end to adjust the tension. After achieving the desired tautness, trim the excess rope close to the knots. For synthetic ropes, use a lighter to melt and seal the cut ends to prevent unraveling. For natural fiber ropes, consider using tape, whipping, or a decorative cap to finish the ends.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Adjust Tension and Trim Ends

Once the rope is threaded and secured at both ends, check the overall tension. The handrail should feel firm and provide adequate support without sagging significantly. If necessary, untie and re-secure one end to adjust the tension. After achieving the desired tautness, trim the excess rope close to the knots. For synthetic ropes, use a lighter to melt and seal the cut ends to prevent unraveling. For natural fiber ropes, consider using tape, whipping, or a decorative cap to finish the ends.

Videos for this step

Final Cable Tensioning

Tools and Materials

← Project

How to Install a Rope Handrail Along a Stair Wall

Step 6 of 7·30 min left

Determine Handrail Placement and Height
30 minutes3 items
Locate Wall Studs
15 minutes2 items
Install Mounting Brackets/Anchors
45 minutes5 items
Cut Rope to Length
15 minutes3 items
Thread and Secure Rope
60 minutes2 items
6
Adjust Tension and Trim Ends
20 minutes3 items
7
Test Handrail Stability
10 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.