Step 3 · Snake the Shower Drain

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

If plunging doesn't work, the clog is likely further down or more stubborn, consisting of hair and soap scum. You'll need to use a drain snake. First, wear your gloves and have a bucket ready for any retrieved gunk. You may need a screwdriver to remove the shower drain cover. Carefully feed the end of the drain snake into the shower drain. Push the snake in until you feel resistance. Once you hit the clog, lock the snake's cable and turn the handle clockwise while applying gentle forward pressure. This will either break up the clog or allow the auger tip to hook into it. Retract the snake, cleaning the end into the bucket. Repeat until the snake moves freely. Flush with hot water and test the shower again.