Step 9 · Test Faucet and Final Cleanup
With the water on and no leaks detected from below, it's time to test the faucet's operation. Turn the hot water handle and let the water run for a minute to purge any air from the line. Check that the water flows smoothly from the spout. Turn it off and repeat with the cold water handle. Then, turn on both to check the mixed flow. While the water is running, perform one final leak check at the access panel. Once you are confident everything is working correctly and is completely dry, you can clean up your tools, wipe down the tub deck, and reinstall the access panel.
Tools and Materials
PrevNext