Skip to main content
Stesso
BrowseMy ProjectsBlog
Log inSign up
Stesso

Step 7 · Reinstall Stopper and Test for Leaks

Reinstall the tub stopper mechanism by reversing the steps you took to remove it. Screw the central post back into the cross-piece, then attach the top knob. Before using the shower, perform a leak test. Close the newly installed stopper and fill the tub with a few inches of water. Let it sit for 10-15 minutes and check for any signs of leaks around the drain (if you have access below) or simply observe if the water level in the tub has dropped. Then, open the stopper and let the tub drain completely, again checking for any leaks while the water is flowing.

Stesso
BrowseMy Projects
Sign in

Step 7 · Reinstall Stopper and Test for Leaks

Reinstall the tub stopper mechanism by reversing the steps you took to remove it. Screw the central post back into the cross-piece, then attach the top knob. Before using the shower, perform a leak test. Close the newly installed stopper and fill the tub with a few inches of water. Let it sit for 10-15 minutes and check for any signs of leaks around the drain (if you have access below) or simply observe if the water level in the tub has dropped. Then, open the stopper and let the tub drain completely, again checking for any leaks while the water is flowing.

Tools and Materials

← Project

How to Remove and Replace a Bathtub Drain Flange

Step 7 of 7·20 min left

Prepare the Work Area
5 mins2 itemsBeginner
Remove the Tub Stopper
10 mins1 itemsIntermediate
Remove the Old Drain Flange
15 mins4 items
Clean the Drain Opening and Threads
15 mins3 itemsIntermediate
Prepare the New Drain Flange
10 mins3 itemsIntermediate
Install the New Drain Flange
15 mins5 itemsAdvanced
7
Reinstall Stopper and Test for Leaks
20 mins2 itemsBeginner
PrevNext